Motor Parameters Setup for Soft Starters
To setup a Soft Starter for a specific motor:
For the GX Series:
- Set P0-00 = to the motor rated current.
For the GW and GS Series:
- Set FP = to the motor rated current.
- Adjust F6 (Soft Starter Maximum Current) if this is too high for the applicable motor.
- In case of an Error 05, please set FA (Protection Level) = 2.
- After running the motor for the first time, measure the actual Current and Voltage and ensure it aligns with the Current and Voltage as displayed on the Soft Starter screen. If there are variances, please calibrate the readings as explained HERE (calibrations might be affected due to transportation etc. and might therefore require some adjustments).
