Soft Starter Auto Start Setup
For GX Series Soft Starter:
- Connect terminals DI1 and COM with a On/Off Switch
- Set P0-06 = 1 (Terminal Control)
For GW or GS Series Soft Starters:
- Connect terminals 7 and 10
- Connect terminals 8 and 9
- Connect terminals 9 and 10 with a On/Off Switch
- Set FB = 2
When the switch is On, the Soft Starter will Start and Run the motor. If a power failure occurs, the Soft Starter will automatically start the motor up again once the power supply returns.
* Please Note: If a Start Delay is required, an external delay relay will be required.
