External On /Off lights can be used to indicate a GW Series Soft Starter’s running status by using the Soft Starter Relay Output (Terminals 3 and 4). In order to do that a Power Source can be connected to the Soft Starter Relay (Terminals 3 and 4) with the Indicator Light connected to the circuit. Using the Relay Output parameters the Outputs can be controlled by the Soft Starter Running Status by setting the following parameter:
- Set FE = 6 (Working State)
* Note that the On/Off state can be ‘switched’/’reversed’ by setting FE = 16 (instead of 6).
Contact driving capacity:
- 250 Vac, 5 A
